Booklets: International Interdisciplinary Congress on Renewable Energies, Industrial Maintenance Mechatronics and Informatics

 


 

Area VII Engineering

Supply model in academic workshop of coffee bean roasting
Ramírez-Román, Adolfo, Rodríguez-Rodríguez, Luis Alberto, Suárez-Alvarez, Ángel and Chabat-Uranga, Jacqueline

 



 

State Estimation of Discrete Event Systems Using Fuzzy Timed Petri Nets
González-Castolo, Juan Carlos, López-Mellado, Ernesto, Ramos-Cabral, Silvia and Zataraín-Durán, Omar Alí

 



 

Analysis and Control of a three-phase motor using a neural network
Hernández-Epigmenio, Miguel Ángel, Martínez-Carrillo, Irma, Juárez-Toledo, Carlos and Camacho- Altamirano, Ulices

 



 

Physicochemical Characterization of the Material Used in the Manufacture of Brick in an Artisanal Way
Salazar-Peralta, Araceli, Bernal-Martínez, Lina Agustina, Pichardo-Salazar, José Alfredo and Pichardo-Salazar, Ulises

 



 

Design and manufacture of a vise
Delgado-Hernandez, Alberto, Gonzalez-Vizcarra, Benjamín, Siqueiros-Hernandez, Miriam and Castañeda, Ana María

 



 

Reconstruction of motor voltage control signal in industrial applications using IoT
Camacho-Altamirano, Ulices, Martínez-Carrillo, Irma, Juárez-Toledo, Carlos and Hernández-Epigmenio, Miguel Ángel

 



 

Implementation of a system ANDON for the utilities department in a plastic injection plant
Sotelo-Martínez, Samuel, Ocampo-Martínez, Rafael, Olivo-Flores, Marco Antonio and García-Mendoza, Rufino

 



 

Experimental investigation of FFF process parameters using carbon fiber reinforced PETG material by Taguchi analysis
Martinez-Cervantes, J. Alana, Sánchez-Luis, Javier and Aguilar-Duque, Julian-I

 



 

Design and development of universal leg prostheses with size adjustment using polylactic acid (PLA)
Murillo-Rendón, Pablo Antonio, Cuate-Gomez, Diego Hernan, Garzón-Román Abel and Lugo-Quintal, Jesús Manuel

 



 

Environmental impact of energy consumption in academic buildings: Case study of the faculty of agricultural sciences at UAEM, Life Cycle Analysis approach
Brito-R., Julio Cesar and Hernández-Luna, Gabriela

 



 

Exploring the Food Quality System (SQF) in Plastic Cap Manufacturing: A Scientific and Practical Approach
Campos-Villegas, Cesar Antonio and Pecina-Rivas, Erika María

 



 

Impementation of an IoT-based crop irrigation system for adverse conditions
Osuna, Eduardo, Ramírez, Susana, Hernandez, Obrian and Beltrán, Olga

 



 

Thermodynamic Analysis of Nuclear Plants: A Virtual Perspective
Franco-Martínez, David and Sampayo-Meneses, Alberto

 



 

Sustainable design of dynamic elbow orthoses for adult rehabilitation treatment
Castillo-Aguirre, Alfredo Humberto, Baez-Guzman, Ricardo, Cruz-Gomez, Marco Antonio and López-Aguilar, Genaro Roberto

 



 

Desktop forklift simulator -DFS
Juárez-Santiago, Brenda, Mendoza-Hernandez, Guillermo, Ledesma Uribe, Norma Alejandra and Santos-Osorio, Rene

 



 

Speed control of 3 phase induction motor using an rc circuit as a start signal
Juárez-Toledo, Carlos, Martínez-Carrillo, Irma, Hernández-Epigmenio, Miguel Ángel and Camacho-Altamirano, Ulices

 



 

Development of new standardized methods for calculating fuel poverty index: a study in the coast of Cabo Corrientes Jalisco
Cerda-Carrillo, Nelya, Vega-Gómez, Carlos Jesahel, Sandoval-Hernández, Erika and Rojas-Ramírez, José Juan Pablo

 



 

Implementation of an Inventory System through FIFO
Acosta-González, Yanid, Delgado-Gómez, Gilberto, García-Ruíz, Cecilia Edith and Arcos-Fernández, Ashley Naomi

 



 

Thermal-structural numerical analysis of the brake and disc system of a Formula SAE 2024 type vehicle
López-Flores, Jennifer Guadalupe, Cordero-Guridi, José de Jesus, Ovando-Cuevas, Enrique Romeo and Yescas-Ávila, Eber Alonso

 



 

Analysis of thermal loads using BIM methodology to reduce the energy consumption of buildings in Morelos, Mexico
Vázquez-Fuentes, Erick E., Montiel-González, Moisés, Alvarado-Juárez, Roberto and Morales-Gómez, Laura

 



 

Biogas production using cheese whey in a bioreactor controlled by an arduino-based system
Nava-Saldaña, Alberto, Rojas-Escobar, Silvino, González-Contreras, Brian Manuel and Guevara-García, José Antonio

 



 

Electricity consumption measurement device for the design of an energy management system
Sifuentes-Godoy, David, Mar-Luna, Felix, Irigoyen-Campuzano, Rafael and López-Zumaran, Ivan

 



 

Thermoeconomic analysis in solar collector fields: a focus on constant flowrate and variable flowrate models
Lugo-Granados, Hebert Gerardo, Canizalez-Dávalos, Lázaro and Picón-Núñez, Martín

 



 

Global port supply chain management
Cruz-Ramirez, Christiana, Cruz-Gomez, Marco Antonio, Espinosa-Carrasco, María del Rosario and Mejia-Perez, José Alfredo

 



 

Construction and development of an ultrasonic spray pyrolysis system for semiconductor thin films deposition to photovoltaic applications
Palacio-Sifuentes, David, Alvarez-Macias, Carlos, Rodríguez-Castro, Sergio and Martinez-Lopez, Ricardo

 



 

Domotic control by codification of electromyographic signals and network sockets
González-Silva, Marco Antonio and Hernández-Pérez, Faride

 



 

Thermodynamic study for the recovery of lithium and cobalt from waste batteries
Farias-Gonzalez, Miguel Angel, Farias-Gonzalez, Francisco Javier and Perez-Castro, Laura Luz

 



 

Feasibility of dry canals in the Americas
Castillo-Aguirre, Alfredo Humberto, Cruz-Gomez, Marco Antonio, Mejia-Perez, José Alfredo and Espinosa-Carrasco, María del Rosario

 



 

Proposal for standardization in the warping process in textile manufacturing
Bahena-Medina, Lilia Araceli, Gómez-Vicario, Miguel Ángel, Reyes-Velázquez, Alejandro and Hernández-Jasso, Ana María

 



 

Structural analysis of a lifting platform for autonomous vertical vehicular parking
Betanzos-Castillo, Francisco, Fuentes-Castañeda, Pilar and Cortez-Solis, Reynaldo

 



 

Development of a prototype spoiler for effective braking of a racing motorcycle, utilizing active aerodynamics
Cruz-Olvera, Leonardo, Cuate-Gomez, Diego Hernan, Garzón-Román, Abel and Lugo-Quintal, Jesús Manuel

 



 

Using latent heat from a water purification system to improve the performance of an absorption heat transformer
Morales, L.I., Siqueiros J.b, Juárez-Romero D.c and Hernández-Soria A.H

 



 

Engine cooling system analysis of a low displacement motorcycle using thermography
Cruz-Ramirez, Christiana, Cruz-Gomez, Marco Antonio, Espinosa-Carrasco, María del Rosario and Mejia-Perez, José Alfredo

 



 

Obtaining the transfer function using Matlab's System Identification and PID controller for a temperature plant of an USP-type reactor
Grijalva-Cedillo, Samuel, García-Hernández, Ramón, Álvarez-Macías, Carlos and Martinez-Lopez, Ricardo

 



 

Performance comparison in optimization algorithms for heart disease detection model
Rojas, Rafaela, Seseña, Hiram, Zuñiga, Mariana and Martínez, Moises

 



 

Diagnostic, analysis and management of the routes of a distribution center of a dairy producer in the state of Mexico
Zenteno-Bonola, Ana Luisa, Calderón-Ríos, Norma Otilia, Palomar-Fuentes, María del Pilar and Benitez-Vallejo, Juan Carlos

 



 

Determination of the solar fraction for optimized parabolic concentrator solar collector networks
Lizárraga-Morazán, Juan-Ramón and Picón-Núñez, Martín

 



 

Ships decarbonization is an urgent technology and responsibility challenge that impacts global warming
Flores-Cruz, Luis Antonio, Cruz-Gómez, Marco Antonio, Correa-Nieto, Marco Antonio and Mejía-Pérez, José Alfredo

 



 

Optimization of production processes through the Kaizen philosophy to reduce time
Hernández-Anaya, Fernanda, López-Garza, Esmeralda, Garza-Moreno, Jesús Cruz and Espíndola-Álvarez, Jorge Antonio

 



 

Evaluation of the grinding performance at the saucito I plant and optimization of the knelson QS30 gravimetric concentrator
Contreras-Pimentel, Luís Ángel, Nájera-López, Aimeé Nataly, Villegas-Martínez, Rodrigo Cervando and García-González, Juan Manuel

 



 

Optimization of the corn snack manufacturing process to reduce production costs
Bahena-Medina, Lilia Araceli, Gómez-Vicario, Miguel Angel, Reyes-Velázquez, Alejandro and Landa-Mendoza, Jatziri

 



 

Blockchain: A Disruptive Technology and Its Initiatives in the State of Hidalgo, Mexico
Albores-Villatoro, Luz Angelina and López-Sánchez, Máximo

 



 

Portable equipment and interface to train in CPR based on monitoring the applied force
Seseña, Hiram, Zuñiga, Mariana, Nápoles, Elías and Martínez, Moisés

 



 

Non-invasive analysis for detecting gear fractures in automotive transmissions
Zuñiga, Mariana, Rojas, Rafael, Nápoles, Elías and Martínez, Moisés

 



 

Development and desing for a vehicular care based on a embedded system to prevent car heist
Nápoles, Elías, Rojas, Rafael, Seseña, Hiram and Martínez, Moisés

 



 

Dynamic evaluation of composite roofs: Thermal optimization with PCM under extreme climate conditions
López-Salazar, Samanta, Simá, E., Chagolla-Aranda, M.A., Chávez-Chena, Y

 



 

Implementation of a big data ecosystem for interdisciplinary analysis in academic projects: Collaboration Between Engineering and Communication in the Study of the 2024 Mexican Elections
Mendoza-González, Omar, Hernández-Cabrera, Jesús, Sánchez-Hernández, Miguel Ángel

 



 

Wind speed forecasting one step ahead using different input vectors in a neural network
Cadenas, Erasmo, Méndez, Alma-Rosa, Arreola-Sixtos, Antonio and Campos, Rafael

 



 

Mobile application with augmented reality and geolocation to promote tourist attractions of santa cruz zenzontepec, sola de vega, oaxaca, phase 3, 4 and 5: coding, test and launch
Rojas-Nando, Julio Cesar, Reyes-Luna, Nayely, Martinez-Parra, Eloy and Bautista-Ortiz, Adriana Ruvice

 



 

Standardized tool for the identification and control of risks associated with tasks in the work environment
Cardona-Martinez, Clara, Ramirez-Benhumea, David Alejandro, Guevara-Hernandez, Eduardo and Beltran-Medina, Paulina K.

 



 

Synthesis and characterization of carbon-based quantum dots for use in Biotechnology
Granados-Olvera, Jorge Alberto, Calvillo-Beltrán, Sofía Valentina, Arroyo-Ordoñez, Ivan and Rangel-Ruíz, Karelia Liliana

 



 

Web framework for the operational planning management system
Escorza-Sánchez, Yolanda Marysol, Mendoza-Espinoza, Héctor Eduardo and Hernández-Gracia, Tirso Javier

 



 

Innovative Approaches in Teaching Modal Analysis: Utilizing Additive Manufacturing for Structural Engineering Education
Centeno-Moreno, Alan Ibrahim, Torres-Cedillo, Sergio Guillermo, Cortes-Pérez, Jacinto and Reyes-Solís, Alberto

 



 

System autotronic control system for vehicle and pedestrian detection by means of artificial intelligence artificial intelligence
Sámano-Flores, Yosafat Jetsemani, Serráno-Ramírez, Tomás, Vargas-Torres, Antonio and Campos-Hernández, Juan Salud

 



 

Viability of an earth/air heat exchanger applied in the Mérida city, Yucatan, México through the internet of things
Chan-González, Jorge J., Gallegos-Sánchez, Selene, Andrade-Durán, Juan Edgar and Lezama-Zárraga, Francisco

 



 

Evaluation of operational efficiency in a company dedicated to the manufacture and sale of coolers
Cano-Carrasco, Adolfo, González-Mendivil, Manuel Antonio, Fornés-Rivera, René Daniel and Noriega-Olivas, Israel

 



 

Biofilm of potato starch and silver nanoparticles
Díaz-Silvestre, Sergio E. and Ramirez, Leticia

 



 

Automatic return system for hot water recovery in the shower
Medina-Mendoza, Manuel, Dorantes-Rodríguez, Rubén José, Nicolás-Bermúdez, Jesús and Fuentes-Romero, María Teresa

 



 

Rapid optimization of decapod crustacean digestion for efficient microplastic extraction (MPs)
Pérez-Gómez, E.O., García-Rosales, G. and Longoria-Gándara, L.C.

 



 

Technology transfer in the integrative projects of the new educational model at the Technological University of Jalisco, digital Creative City headquarters
Gonzalez-Del Castillo, Edgardo Emmanuel, Romo-Gonzalez, Ana Eugenia, López-Laguna, Ana Bertha and Peña-Montes De Oca, Adriana Isela

 



 

Experimental proposal of a 'HALO'-type security device in a FORMULA SAE 2023 type vehicle
Noguez-Jimenez, Victor Manuel, Cordero-Guridi, José de Jesús, Peréz-Carrillo, Daniel and Garcia-Tepox, José Domingo

 



 

Effect of the angle of solar irradiance on the photo generation of a photovoltaic module
Castillo-Campos, Nohemí Alejandra, Palacio-Sifuentes, David Isaac, Escobedo-Márquez, Diana Laura and Álvarez-Macías, Carlos

 



 

Implementation of dmaic methodology in a production line of the brewing industry
Colorado-Issa, Cinthia Judith, López-Acosta, Mauricio, Chacara-Montes, Allán and García-Vilches, Susana

 



 

Hardware and software system for simulation, control, and communication between industrial automation programs and PLC control used in educational institutions
Arroyo-Diaz, Salvador Antonio, Ortiz-Carranco, Araceli and Morales-Illescas, Maria Elibeth

 



 

Design of a single-seater chassis for a BAJA SAE vehicle
Lozano-Díaz, Alberto, Alfaro-Méndez, Jonathan, Serrano-Ramírez, Tomás and Peña-Aguirre, Julio C.

 



 

Development of an Inventory Management System for a Company Specializing in Refrigeration
Sapien, Claudia, Portugal, Javier, Lagarda, Ernesto and Vega, Ernesto

 



 

Estimation of lithium-ion battery state of health using an ensemble model integrated with random forest and linear regression techniques
Medina-Martínez, Sergio Iván, Juárez-Toledo, Carlos and Martínez-Carrillo, Irma

 



 

5S diagnosis in the substation department of the western transmission area
Serrano, Sergio, Maturano, Benito, Castellanos, Liliana and Alvarado, José Luis

 



 

Proposed drinking water treatment system implementing activated carbon and calcium hypochlorite composition filters toprevent health problems of the inhabitants of Irregular Periurban Areas
Torres-Rivero, Ligia Adelayda, Basto-Pech, Miguel Angel and Sanchez-Quijano, Luis Arcadio

 



 

Genomic instability in a former high-performance athlete
Castañeda-Aguirre, Víctor Elías, Rangel-Colmenero, Blanca Rocío, García-Vielma, Catalina and Cortes-Gutierrez, Elva Irene

 



 

Automatic irrigation of hydroponic lettuce cultivation with IoT
Cota-Luna, Xóchitl Yadira, Casas-Gómez, Víctor Manuel, Hidalgo-Baeza, María del Carmen and Martínez-Román, Alejandro

 



 

Web application for learning Zapotec Diidxazá
Rafael-Pérez, Eva, Pineda-Nivón, Aimée Jahdaí, Díaz-Sarmiento, Bibiana and Villalobos-García, Julio César

 



 

Mobile application: Learning Zapotec Diidxazá
Rafael-Pérez, Eva, Pineda-Nivón, Aimée Jahdaí, Morales-Hernández, Maricela and Altamirano-Cabrera, Marisol

 



 

Study of times and movements in the packing process of the company Flores de María
Oscos-Fuentes, Eduardo, Lara-Álvarez, Daniel Emiliano, Castañeda-Romero, Alberto Fernando and García-Castillo, Karla Yazmín

 



 

Turmeric nanoparticles with β-glucan and vitamins C, D3 and zinc
Pinales-Muñiz, Karla Lucia, Nery-Cepeda, Sebastián, Canales-Pradis, Braulio and Díaz-Silvestre, Sergio Enrique

 



 

Viability Evaluation in SCAP through development in different impacts
Hernández-Ramos, Katia, Hernández-Ramos, Alma Yizel, Panecatl-Bernal, Yesmin and Hernández-Corona, Sergio

 



 

Database design to translate from Nahuatl to Spanish
Luna-Eslava, Rubi, Sampayo-Rodríguez, Carmen Jeannette and Torres-Jimenez, Jacinto

 



 

Conceptual development of a pulverizer for glass recovery
Fuentes, Pilar, Betanzos, Francisco and Cortez, Reynaldo

 



 

Virtual Learning Objects to promote ethics in the development and use of Artificial Intelligence in higher education
Mireles-Medina, Antonia, Mizera-Pietraszko, Jolanta and Figueroa-Guillén, Carlos

 



 

Proposal for the design of a mist irrigation system to improve the production and quality of the mushroom fungus (pleurotus ostreatus)
Soto-Leyva, Yasmin, Ruíz-Díaz, Montserrat, Bones-Martínez, Rosalía and Martínez-Domínguez, José Antonio

 



 

Soiling of Photovoltaic Modules: Impact on Performance and Mitigation Strategies
Escobedo-Márquez, Diana Laura, Castillo-Campos, Nohemí Alejandra, Esmeralda-Gómez, Alma Graciela and Álvarez-Macías, Carlos

 



 

Ecological Waterproof Adobe Brick based on Straw and Manure
Bones-Martínez, Rosalía, Soto-Leyva, Yasmin, Ruíz-Díaz, Montserrat and Santos-Osorio, Arturo

 



 

Leadership in the professional training of Computer Systems Engineers
Hernández-Cruz, Luz María, Mex-Álvarez, Diana Concepción, Llanes-Chiquini, Charlotte Monserrat de Jesús and Fuentes-Caraveo, Eugenia de los Ángeles